How many units is 300 mcg of CJC-1295 / Ipamorelin blend?

It depends entirely on how much water you added. In a 10 mg vial reconstituted with 2 mL, the concentration is 5 mg/mL, so 300 mcg is 0.06 mL, which is 6 units on a U-100 insulin syringe. In the same vial with 1 mL of water it is 3 units, and with 3 mL it is 9 units.

How much bacteriostatic water for a 10 mg CJC-1295 / Ipamorelin blend vial?

2 mL is the usual choice. It gives 5 mg/mL, which puts the commonly reported range of 100 mcg to 600 mcg between roughly 2 and 12 units. Aim for a draw between about 10 and 50 units, where the barrel is easiest to read, and add or remove water to get there.

How many doses are in a 10 mg vial?

Divide 10 by your dose. At 300 mcg that is 33 doses, which at once daily is 33 days.

How many units is 300 mcg of the CJC-1295 ipamorelin blend?

In a 10 mg blend vial with 2 mL of water, 6 units on a U-100 syringe. That draw contains 150 mcg of each peptide.

Can I dose the two peptides separately from a blend?

No. The ratio is fixed in the vial. If you want a different ratio you need two separate vials, and the calculator run once for each.

How many doses are in a 10 mg CJC-1295 ipamorelin blend vial?

A 10 mg blend vial holds 10,000 mcg. At 300 mcg of blend a draw that is 33 doses, each holding 150 mcg of CJC-1295 and 150 mcg of ipamorelin; at 200 mcg it is 50 doses. The water volume changes the units on the syringe, not the number of doses.

How many doses are in a 5 mg vial of CJC-1295?

50 at 100 mcg and 25 at 200 mcg for a vial of CJC-1295 alone. A 10 mg CJC-1295 / ipamorelin blend vial holds only 5 mg of CJC-1295, with 5 mg of ipamorelin alongside, so at 100 mcg of each it is 50 doses.

CJC-1295 / Ipamorelin blend dosage calculator and chart

In a 10 mg vial with 2 mL of water (5 mg/mL), 300 mcg of CJC-1295 / Ipamorelin blend is 6 units on a U-100 insulin syringe. The blend vial is usually 5 mg of CJC-1295 and 5 mg of ipamorelin, 10 mg in total. Enter the total on the label and your total dose, and the page also splits it back into each peptide.

Reviewed 3 September 2026
27 compounds
Formula on every page
No ads, no vendor links

Peptide calculator by Peptulator Free, no signup. Research use only, not medical advice.

Free downloadThe Protocol Pack

25 printable pages: dosing cards for the twelve most-used compounds at three water volumes, titration planners, a vial log, and five pages on what to do when it has already gone wrong.

CJC-1295 and ipamorelin dosage chart for the 10 mg blend

The 10 mg blend vial is 5 mg of CJC-1295 (no DAC) and 5 mg of ipamorelin, mixed 1:1, so every draw is half of each. With 2 mL of bacteriostatic water, 300 mcg of blend (150 mcg of each) is 6 units on a U-100 insulin syringe. The table is the total of the blend; halve it for each peptide.

Vial	Water	Concentration	200 mcg	300 mcg	400 mcg	600 mcg
5 mg	1 mL	5000 mcg/mL	4	6	8	12
5 mg	2 mL	2500 mcg/mL	8	12	16	24
10 mg	1 mL	10000 mcg/mL	2	3	4	6
10 mg	2 mL	5000 mcg/mL	4	6	8	12
10 mg	3 mL	3333 mcg/mL	6	9	12	18

Units on a standard U-100 insulin syringe, where 100 units is 1 mL. * means more than 100 units, so more than one 1 mL syringe.

A 10 mg blend vial is 50 doses at 200 mcg of blend (100 mcg of each) and 33 at 300 mcg. If you have a vial of one peptide only, use the CJC-1295 calculator or the ipamorelin calculator instead.

Dose to units at the usual vial and water

Dose	U-100 units	Draw	Doses per vial	Vial lasts
100 mcg	2 units	0.02 mL	100	100 days
200 mcg	4 units	0.04 mL	50	50 days
300 mcg	6 units	0.06 mL	33	33 days
400 mcg	8 units	0.08 mL	25	25 days
500 mcg	10 units	0.1 mL	20	20 days
600 mcg	12 units	0.12 mL	16	16 days

10 mg vial in 2 mL of bacteriostatic water (5 mg/mL), U-100 insulin syringe, once daily.

About CJC-1295 / Ipamorelin blend

This is the most common growth hormone secretagogue pairing: a GHRH analogue (CJC-1295, usually the no-DAC form) plus a ghrelin mimetic (ipamorelin). The two act on different receptors and are sold pre-mixed in a single vial so they can be drawn in one syringe.

The trap with blends is that the label gives the total, and both components are in a fixed ratio you cannot change. A 10 mg vial is normally 5 mg of each. Reconstituted with 2 mL it is 5,000 mcg of blend per mL, so a 300 mcg draw (6 units) delivers 150 mcg of CJC-1295 and 150 mcg of ipamorelin. Commonly reported doses are 200 to 300 mcg of total blend, one to three times daily.

Dosing ipamorelin or CJC-1295 from separate vials? Use the ipamorelin dosage calculator or the CJC-1295 dosage calculator.

What is in each draw

The vial is 5 mg CJC-1295 (no DAC) + 5 mg Ipamorelin, a fixed 1:1 ratio. Every draw contains all of them in that proportion. Split below for 10 mg in 2 mL (5 mg/mL). The per-component figures are inferred from the label ratio, not measured.

Draw	Total blend	CJC-1295 (no DAC)	Ipamorelin
5 units	0.25 mg	0.125 mg	0.125 mg
10 units	0.5 mg	0.25 mg	0.25 mg
15 units	0.75 mg	0.375 mg	0.375 mg
20 units	1 mg	0.5 mg	0.5 mg
25 units	1.25 mg	0.625 mg	0.625 mg
30 units	1.5 mg	0.75 mg	0.75 mg

The same 10 mg vial at other water volumes

If the draw is awkward to read, change the water, not the dose. The dose stays the same; only the mark moves.

Vial	BAC water	Concentration	Draw	U-100 units	Doses/vial
10 mg	1 mL	10 mg/mL	0.03 mL	3 units	33
10 mg	2 mL	5 mg/mL	0.06 mL	6 units	33
10 mg	3 mL	3.33 mg/mL	0.09 mL	9 units	33
20 mg	1 mL	20 mg/mL	0.015 mL	1.5 units	66
20 mg	2 mL	10 mg/mL	0.03 mL	3 units	66
20 mg	3 mL	6.67 mg/mL	0.045 mL	4.5 units	66

All rows above assume a 300 mcg dose and a standard U-100 insulin syringe, where 100 units = 1 mL.

How long it lasts in the body

The half-life of CJC-1295 / Ipamorelin blend is about 2 hours. That is the time for the amount in your blood to halve, so after one half-life you are at 50 percent of the peak, after two you are at 25 percent, and after four you are at roughly 6 percent. This is why it is dosed daily or more often: by the next morning almost none of the previous dose is left, and there is no build-up from day to day.

Common questions

How many units is 300 mcg of CJC-1295 / Ipamorelin blend?: It depends entirely on how much water you added. In a 10 mg vial reconstituted with 2 mL, the concentration is 5 mg/mL, so 300 mcg is 0.06 mL, which is 6 units on a U-100 insulin syringe. In the same vial with 1 mL of water it is 3 units, and with 3 mL it is 9 units.
How much bacteriostatic water for a 10 mg CJC-1295 / Ipamorelin blend vial?: 2 mL is the usual choice. It gives 5 mg/mL, which puts the commonly reported range of 100 mcg to 600 mcg between roughly 2 and 12 units. Aim for a draw between about 10 and 50 units, where the barrel is easiest to read, and add or remove water to get there.
How many doses are in a 10 mg vial?: Divide 10 by your dose. At 300 mcg that is 33 doses, which at once daily is 33 days.
How many units is 300 mcg of the CJC-1295 ipamorelin blend?: In a 10 mg blend vial with 2 mL of water, 6 units on a U-100 syringe. That draw contains 150 mcg of each peptide.
Can I dose the two peptides separately from a blend?: No. The ratio is fixed in the vial. If you want a different ratio you need two separate vials, and the calculator run once for each.
How many doses are in a 10 mg CJC-1295 ipamorelin blend vial?: A 10 mg blend vial holds 10,000 mcg. At 300 mcg of blend a draw that is 33 doses, each holding 150 mcg of CJC-1295 and 150 mcg of ipamorelin; at 200 mcg it is 50 doses. The water volume changes the units on the syringe, not the number of doses.
How many doses are in a 5 mg vial of CJC-1295?: 50 at 100 mcg and 25 at 200 mcg for a vial of CJC-1295 alone. A 10 mg CJC-1295 / ipamorelin blend vial holds only 5 mg of CJC-1295, with 5 mg of ipamorelin alongside, so at 100 mcg of each it is 50 doses.

IndependentThis site does not sell peptides and is not owned by a vendor.

The maths is openThe formula is on every page and in the methodology. The code is one file with an automated test suite, run before each deploy.

How it is fundedNo ads and no vendor links here. It is published by the team behind Peptide Bureau, which earns from affiliate links on its own site, and VialHaus, the same team's vial storage shop, which the storage notes link to.

ReviewedDose ranges and half-lives checked 3 September 2026.

Buying CJC-1295 / Ipamorelin blend?

Peptulator does not list, rank or link vendors. Whoever the supplier is, use the strength printed on your own vial and check the batch certificate of analysis before you rely on any number here.

The CJC-1295 and ipamorelin guideDosing, evidence and side effects, at Peptide Bureau Read a syringeU-100 vs U-40, and the 2.5x error Build a full protocolThe stack builder at Peptide Bureau, about two minutes

Common conversions

The same three-step maths, pre-filled for the doses people ask about most. Units on a U-100 insulin syringe, where 100 units is 1 mL.

mg to units calculator Any dose at any concentration, both directions, with the full reference tables
Units to mg calculator What the units you drew are in milligrams
1 mg to units The most-asked conversion, at every common setup

Related calculators and charts

Growth hormone axis

HGH (somatropin) calculator IU vials to syringe units
Ipamorelin calculator mcg doses, in mL and units
CJC-1295 (no DAC) calculator No-DAC and DAC, mcg to units
CJC-1295 / Ipamorelin blend calculator (this page)
Sermorelin calculator Nightly mcg doses to units
Tesamorelin calculator 1 to 2 mg daily, in units
Hexarelin calculator mcg doses to units
IGF-1 LR3 calculator Tens of mcg from very small vials
AOD-9604 calculator 300 mcg daily, in units
MOTS-c calculator 5 to 10 mg, two or three times a week

Every one of the 27 compound calculators, charts and tools: the full list.

Before you use these numbers This is a unit-conversion tool. It turns a vial strength and a water volume into a concentration, a draw volume and a syringe mark. It does not tell you what to take, whether to take it, or whether a compound is safe for you. Most compounds listed are sold for laboratory research and are not approved for human use. Nothing here is medical advice. Dosing decisions belong with a licensed clinician who knows your history. Always check the strength printed on your own vial rather than trusting a preset.